Miele WDD 035 - How the Control Field Works

Operating the washing machine
13
g
Time display
After the programme has started, the
programme duration will appear in
the display in hours and minutes.
When Delay start is being used, the
programme duration will appear after
the Delay start time has elapsed.
h
Sensor controls  
The Delay start time selected will ap-
pear in the time display.
After the programme has started, the
Delay start time will begin to count
down.
Once the Delay start time has
elapsed, the programme begins and
the estimated programme duration
appears on the time display.
 After touching the sensor
control, a later start time for the
programme (Delay start) can be
selected. Once selected, 
lights up brightly.
 The duration of the Delay start
period is increased by touching
the sensor control.
 The duration of the Delay start
period is reduced by touching
the sensor control.
i
Start/Stop sensor
Touching the Start/Stop sensor
starts the selected programme or
cancels a programme that has
already been started. The sensor
flashes slowly as soon as it is pos-
sible for a programme to be started
and then lights up constantly after
the programme has started.
j
Optical interface
This is used by the Service depart-
ment as a transmission point.
k
Programme selector
This is used for selecting pro-
grammes and for switching off. The
washing machine is switched on
when you select a programme, and
switched off by turning the pro-
gramme selector to the  position.
How the control field works
The , , , ,  and sensor con-
trols react to fingertip contact. If a
sensor control is illuminated, it can be
selected.
If a sensor is brightly lit, this means:
currently selected
If a sensor is dimly lit, this means: it can
be selected