Programmable functions
72
The programmable functions are used
to alter the machine's electronics to
suit changing requirements. Program-
mable functions can be altered at any
time.
The programming is carried out in eight
steps (, , ... ) using the sensor
controls.
Accessing the programming level
Pre-requisites:
– The washing machine is switched on
(the programme selector is pointing
to a wash programme).
– The washing machine door is open.
Touch the Start/Stop sensor and
leave your finger on it whilst carrying
out steps -.
Close the washing machine door.
Wait until the Start/Stop sensor lights
up constantly ...
... and then take your finger off the
Start/Stop sensor.
After approx. four seconds, will light
up in the time display.
Choosing and selecting a pro-
grammable function
The number of the programmable
function will appear in the time display
as and a number: e.g..
Touch the or sensor control to
scroll to the next or previous pro-
grammable function:
Programmable functions
Sensor tone
PIN code
Control field standby status
Memory
Additional pre-wash time – Cot-
tons
Gentle action
Reduced temperature
Water plus
Water plus level
Maximum rinse level
Suds cooling
Anti-crease
Backlight brightness dimmed
Confirm the selected programmable
function by touching the Start/Stop
sensor control.
To Next Page
Loading...
