Miele WSD 323 Selection User Manual

5. Start the programme
26
Starting a programme
 Touch the flashingStart/Add laundry
sensor control.
The door locks and the programme
starts.
If a Delay start time has been selected,
this counts down on the time display. At
the end of the Delay start time or imme-
diately after the programme has started,
the programme duration appears on the
time display.
Energy savings
After 10minutes, the indicators dim.
The sensor controlStart/Add laundry
flashes.
To reactivate the indicators:
 Touch theStart/Add laundry sensor
control (this does not have any effect
on a programme that is running).
Adding laundry during a pro-
gramme sequence
Laundry can be added or removed at
any time, provided that the  symbol
is not illuminated on the control field.
 Touch theStart/Add laundry sensor
control.
Rotating bars ...... are
shown on the time display.
If the word  appears on the time dis-
play, the door can be opened.
 Open the door and add or remove
laundry.
 Close the door.
 Touch theStart/Add laundry sensor
control.
The programme will continue.
Laundry cannot usually be added or re-
moved if:
– The suds temperature is above 55°C
– The water inside the drum is above a
certain level

Miele WSD 323 Selection Specifications

General

Brand	Miele
Model	WSD 323 Selection
Category	Washer
Language	English