Problem solving guide
48
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
The programme does not start
Problem Cause and remedy
The control panel re-
mains dark.
There is no power to the machine.
Check whether the mains plug is plugged in and
switched on.
Check whether the fuse or circuit breaker has
tripped.
The washing machine has switched off automatically
to save energy.
Switch the washing machine on again by turning
the programme selector.
and alternately ap-
pear in the time display.
The door is not closed properly. The door lock could
not engage.
Close the door again.
Start the programme again.
If the fault message appears again, contact the
Service Department.
To Next Page
Loading...
Need help?
General