Miele WT 2670 - Adding or Removing Laundry after a Programme Has Started

Adding or removing laundry
after a programme has started
Laundry can be added or removed
after the programme has started when
using the following programmes:
–
Cottons
–
Minimum iron
–
Automatic
–
Express
–
Starch
^
Press the
Door button to open the
drum door.
,
Warning: The water in the
machine will be very hot and
could cause burning or scalding.
^ Add or remove items.
^ Close the drum door.
The programme will continue
automatically.
Please note:
Once a programme has started the
machine cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
which can lead to an increase in the
programme duration shown in the
display.
The door cannot be opened, if:
–
the suds temperature is above a
certain temperature (see "Settings
menu - Door release").
–
the water is above a certain level
(e.g. when the
Water plus extra
option has been selected).
–
the programme has reached the
Final spin stage.
–
the electronic programme locking
has been activated.
WASHING
21