Cancelling a programme
You can cancel a programme at any
time after it has started.
^
Press the Start/Stop button briefly or
turn the programme selector to Stop.
... During washing:
The suds will be pumped away and the
washing programme is cancelled.
... During drying:
The garments will be cooled down
before the door can be opened.
If you want to remove the laundry:
^ Press the Door button.
If you want to select a different
programme:
^ Switch the machine off with the I-On/
0-Off button.
^ Switch the machine back on again
and select a new programme.
Interrupting a programme
^
Switch the machine off with the I-On/
0-Off button.
To continue with the same programme:
^
Switch the machine on with the I-On/
0-Off button.
,
Do not switch the washer-dryer
off before the end of a drying
programme. If this was done and the
laundry was then removed immedi
-
ately, it could give off a great deal of
heat.
Altering a programme
After the start of a programme it is no
longer possible to select a different
programme.
You will need to cancel the current
programme before you can select a
new one.
Altering the temperature
You can alter the temperature of a
washing programme up to 5 minutes
after the programme has started.
^
Use the – and + buttons to alter the
temperature.
Changing the programme sequence
44
To Next Page
