Need help?Do you have a question about the Migatronic SIGMA ONE 300 and is the answer not in the manual?
General| Input Voltage | 3 x 400 V |
|---|---|
| Mains Frequency | 50/60 Hz |
| Mains Fuse | 16 A |
| Output Current Range | 30-300 A |
| Duty Cycle 60% at 40°C | 250 A |
| Wire Diameter | 0.6-1.2 mm |
| Protection Class | IP23 |
| Standards | EN60974-1, EN60974-10 |
| Efficiency | 85% |
| Type | Inverter |
Covers mains connection, shielding gas, and electrode holder connections.
Details lift instructions, wire brake adjustment, wire inching, and ventilation.
Guides on wire feed unit assembly and the software update process.
Guides users through initial machine setup, including language, date/time, cooler, and wire feeder.
Details the machine's lock function, allowing users to set different access levels.
Covers software/licenses and calibrating welding hose resistance.
Details the procedure for calibrating gas flow, applicable to certain machine models.
Details common faults like Torch cooling and Gas control, and their resolution.
Explains how to access, save, and reset the machine's error log.
Presents detailed technical specifications for the power source.
Details technical specifications for the wire feed unit.
Lists technical data for the cooling unit.
States the machine's compliance with EU directives and standards.
To Next Page