Need help?Do you have a question about the Migatronic SIGMA SELECT 300 COMPACT and is the answer not in the manual?
General| Brand | Migatronic |
|---|---|
| Model | SIGMA SELECT 300 COMPACT |
| Category | Welding System |
| Language | English |
Describes approved mounting and placement guidelines for the welding machine.
Details how to connect the machine to the correct power supply and type plate information.
Guides on connecting welding hoses, gas supply, and mounting gas cylinders.
Instructs on connecting the electrode holder and earth cable for MMA welding.
Details the process for attaching the remote control unit to the MWF 30.
Explains the operation of the lock-turn mechanism on the MWF 30.
Explains how to adjust the wire brake for optimal wire feeding and reel control.
Illustrates the procedure for opening the wire feed unit door.
Shows how to connect and disconnect the MCU ventilation components.
Provides steps for assembling components within the wire feed unit.
Describes how to activate wire inching functionality for feeding wire.
Outlines the steps for updating the machine's software via an SD card.
Guides on navigating the user menu and setting parameters using control knobs.
Explains how to perform a gas test and adjust gas flow if an IGC kit is installed.
Describes how to start the IGC calibration process for the welding machine.
Details the settings for controlling water cooling, including ON/OFF options.
Illustrates how to configure external control settings for the machine.
Describes how to lock and unlock the machine's functions.
Guides on calibrating the gas flow rate for specific welding processes.
Shows how to view software versions and license information on the machine.
Details how to input or view the 12-digit license number.
Explains how to navigate back to the software version display.
Guides on selecting and managing different software packages for the machine.
Lists common error codes, their causes, and suggested solutions for troubleshooting.
Explains the meaning of various fault symbols displayed on the machine.
Provides specific details and solutions for common error codes like mains, torch cooling, and gas faults.
Guides the user through the initial setup process for the welding machine.
Demonstrates how to lock and unlock machine functions using the graphical interface.
Shows how to access and view software versions and license details.
Explains the process of calibrating cable compensation for welding hose resistance.
Details the configuration options available for the welding torch.
Guides on calibrating gas flow rate using graphical interface features.
Describes the machine's self-protection system and how it handles errors.
Explains how errors are logged, viewed, and reset on the machine.
Official declaration that the machine complies with relevant EU directives and standards.
To Next Page