32 33
FUNCTION PROCESS VALUE RANGE
Selection of trigger mode, 2-times / 4-times MIG/MAG 2/4
Control of current/voltage/ wire feed speed - local/torch control/remote control
Wire inching MIG/MAG
Torch cooling - water cooled/air cooled
Hot-start % MMA 0.0-100.0
Hot-start-time, sec. MMA 0.0-20.0
Arc power, % MMA 0.0-150.0
Gas pre-flow, sec. MIG/MAG 0.0-10.0
Soft-start, m/min MIG/MAG 0.5-24.0
Hot-start, % Synergic -99-(+)99
Hot-start-time, sec. Synergic 0.0-20.0
Slope down time, sec. Synergic 0.0-10.0
Stop amp, % Synergic 0-100
Stop Amp time, sec. Synergic 0.0-10.0
Gas post-flow, sec MIG 0.0-20.0
Sequence timer / Spot welding time, sec. MIG 0.0-50.0
DUO Plus™ value MIG 1-50
Electronic choke MIG -5.0-(+)5.0
Sequence, Sequencesteps MIG 9
EC DECLARATION OF CONFORMITY
MIGATRONIC A/S
Aggersundvej 33
9690 Fjerritslev
Denmark
hereby declare that our machine as stated below
Type: SIGMA Select
conforms to directives: 2014/35/EU
2014/30/EU
2011/65/EU
European standards: EN/IEC60974-1
EN/IEC60974-2
EN/IEC60974-5
EN/IEC60974-10 (Class A)
Issued in Fjerritslev 27.11.2017
Niels Jørn Jakobsen
CEO
WIRE FEED UNIT MWF 30
Wire feed speed, m/min 0.5-30.0
Torch connection EURO
Wire-reel diameter, mm 300
Wire spool, kg 5-18
Duty cycle 100 % 40°C, A 430
Duty cycle 60% 40°C, A 500
Duty cycle max. 40°C, A/% 550/50
3)
Protection class IP23
Wire diameter, mm 0.6-1.6
Gas pressure, MPa (bar) 0.6 (6.0)
Dimensions (HxWxL), mm 413x310x750
Weight, kg 11.6
Standards IEC60974-5.
IEC60974-10 CL. A
COOLING UNIT MCU 1300
Cooling efficiency (1 l/min), W 1300
Cooling efficiency (1.5 l/min), W 1600
Tank capacity, liter 5
Flow, bar - °C - l/min 3.0-60-1.5
Pressure max., bar 5
Standards IEC60974-2.
IEC60974-10 CL.A
Dimension s (HxWxL), mm 207x260x680
Weight 20
Technical data 3
To Next Page
Loading...
