Need help?Do you have a question about the Mikado VBar NEO and is the answer not in the manual?
General| Type | Flybarless system |
|---|---|
| Voltage Range | 3.5V - 8.4V |
| Compatibility | Helicopters |
| Sensors | 3-axis MEMS sensors |
| Telemetry | Yes |
| Firmware | Upgradable |
| Connectivity | USB |
Outlines essential safety instructions and precautions for operating the VBar Control.
Details precautions for using the 2.4 GHz band and potential interference issues.
Provides instructions on how to properly handle and operate the VBar Control transmitter.
Advises on the safe handling and charging of the VBar Control's internal battery.
Explains the procedures for turning the VBar Control transmitter on and off.
Details the process of charging the VBar Control's internal battery via USB or wall charger.
Describes the elements and navigation of the VBar Control's main touchscreen interface.
Explains how the interface changes and what options appear after connecting a model.
Details using gestures to switch the radio between active and standby modes.
Details how to perform a range check and monitor antenna status for reliable connection.
Provides instructions on how to properly install the VBar Control Satellite Receiver in a model.
Guides on the optimal placement of antennae for the receiver in a model for best reception.
Presents safety instructions specific to VBar NEO, VBar, and Mini VBar systems.
Details the wiring connections for VBar NEO, Mini VBar, and VBar systems.
To Next Page
