Do you have a question about the Mikado Mini VBar and is the answer not in the manual?
| Type | Flybarless System |
|---|---|
| Compatibility | Helicopters |
| Channels | 6 |
| Gyro Sensors | 3-axis |
| Operating Voltage | 3.7V - 8.4V |
| Input Voltage | 3.7V - 8.4V |
Details the software features enabling direct setup, programming, and analysis via the VBar Control radio.
Describes the advanced hardware components, including the touch display and wireless connectivity of the VBar Control.
Advises on safe operation within the 2.4 GHz band, considering potential interference.
Provides essential safety guidelines for operating and handling the VBar Control transmitter.
Details safety measures for the LiPo battery and its charging process to prevent hazards.
Explains the procedures for powering the transmitter on, off, and entering standby mode.
Details procedures for performing radio range checks and verifying antenna status for reliable connection.
Details optimal positioning of antennae for maximum signal reception and performance.
Lists critical safety warnings pertinent to the operation of VBar NEO, VBar, and Mini VBar systems.
Illustrates and explains the connection configurations for different VBar models and receivers.