User Manual
Cloud Core Router 2004-1G-12S+2XS
The CCR2004 is a high-performance multicore router with twelve 10G SFP+ ports and two 25G SFP28
ports.
Safety Warnings
Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be
familiar with standard practices for preventing accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully
before beginning installation. Failure to use the correct hardware or to follow the correct procedures
could result in a hazardous situation to people and damage to the system.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity or
hot environments.
Use only the power supply and accessories approved by the manufacturer, and which can be found in
the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal
frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS)
requirements. All Mikrotik devices must be professionally installed.
Quick start
Connect with your computer to the device using Ethernet cable;
Download the configuration tool https://mt.lv/winbox;
To Next Page
Need help?
General
