MikroTik ATL LTE18 kit User Manual

Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the European
Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device
should be installed and operated no closer than 20 centimeters from your body, occupational user, or
the general public.
Quickstart
1. Open the Ethernet port door;
2. Insert the SIM card into the slot, with the chip facing UP;
3. Connect the device to the included PoE injector with an Ethernet cable to the data+power end;
4. Connect the data end of the PoE injector to the computer;
5. Connect the power adapter to the PoE injector;
6. Open https://192.168.188.1 in your web browser;
7. User name: admin, and there is no password (or, for some models, check user and wireless passwords
on the sticker);
8. Enter the PIN code, if required by your mobile network operator;
9. Use the check for update option to upgrade the device to the latest version. You must have an active
SIM card with available data;
10.The device will reboot;
11.Connect again and in the QuickSet menu set a strong password.
Powering
 Number of DC inputs 1

MikroTik ATL LTE18 kit Specifications

General

Product Code	ATL LTE18 kit
CPU Core Count	4
Size of RAM	256 MB
Storage Type	NAND
Storage Size	128 MB
Ethernet Ports	1
Operating System	RouterOS
Operating Temperature	-40°C to 70°C
LTE Download Speed	1.2 Gbps
LTE Upload Speed	150 Mbps
LTE Antenna Gain	4 dBi
Number of SIM Slots	1
Wireless 2.4 GHz Standards	802.11b/g/n
Wireless 2.4 GHz Generation	Wi-Fi 4
Wireless 2.4 GHz Number of Chains	2
PoE in	Yes
MIMO Support	4x4 MIMO
Carrier Aggregation	Yes
Wi-Fi	Yes
LTE Category	18
Architecture	ARM
Wireless 2.4 GHz Antenna Gain dBi	3 dBi
PoE in Input Voltage	18-57 V
Supported Bands	LTE (FDD) bands: 1, 3, 7, 8, 20, 28 LTE (TDD) bands: 38, 40, 41
Antenna Connectors	2x SMA
Power Input	PoE