Quick Guide G7 - BaseBox 2
Models: RB912UAG-2HPnD-OUT (BaseBox 2)
EN - English - Quick Guide:
This device needs to be upgraded to RouterOS v7.10.1 or the latest version to ensure compliance with
local authority regulations!
It is the end users' responsibility to follow local country regulations, including operation within legal
frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS)
requirements. All MikroTik radio devices must be professionally installed
This "BaseBox 2" series Quick Guide covers models: RB912UAG-2HPnD-OUT (BaseBox 2).
This is Wireless Network Device. You can find the product model name on the case label
(ID).
Please visit the user manual page on https://mt.lv/um for the full up-to-date user manual. Or scan the
QR code with your mobile phone.
The most important technical specifications for this product can be found on the last page of this Quick
Guide.
Technical specifications, brochures, and more info about products at https://mikrotik.com/products
Configuration manual for software in your language with additional information can be found
at https://mt.lv/help
MikroTik devices are for professional use. If you do not have qualifications please seek a
consultant https://mikrotik.com/consultants
Depending on the antenna used, you must set its gain. This is to ensure that EIRP meets the limit set by
the local authorities. This is done in the WebFig Quickset menu.
First steps:
To Next Page
Need help?
General
Weight and Dimensions
