EasyManuals Logo

MikroTik cAP ax Quick Guide

MikroTik cAP ax
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Choose your country, to apply country regulation settings;
Set up your wireless network password;
Set up your router password;
The following RouterOS "npk" packages are required for the core functionality of the product:
wifiwave2, system.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry, and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, which can be found in the
original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or
hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
The socket-outlet shall be installed near the equipment and shall be easily accessible.
In the case of device failure, please disconnect it from power. The fastest way to do so is by
unplugging the power adapter from the power outlet.
To avoid contamination of the environment, separate the device from household waste and dispose of
it in a safe manner, for example, in designated areas. Become familiar with procedures for properly
transporting the equipment to designated collection points in your area.
Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the European
Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device
should be installed and operated no closer than 30 centimeters from your body, occupational user, or
the general public.
Manufacturer: Mikrotikls SIA, Unijas 2, Riga, Latvia, LV1039.
BG - Български. Бързо ръководство:
Това устройство трябва да бъде надстроено до RouterOS v7.7 или най-новата стабилна
версия, за да се гарантира спазването на местните наредби!
Крайните потребители са отговорни да спазват местните разпоредби, включително работа в
рамките на законни честотни канали, изходна мощност, изисквания за окабеляване и

Other manuals for MikroTik cAP ax

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MikroTik cAP ax and is the answer not in the manual?

MikroTik cAP ax Specifications

General IconGeneral
2.4 GHzYes
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate1774 Mbit/s
Maximum data transfer rate (5 GHz)1200 Mbit/s
Maximum data transfer rate (2.4 GHz)574 Mbit/s
Output current0.4 A
DC voltage range18 - 57 V
Power consumption (max)28.2 W
Power over Ethernet (PoE) type supportedPassive PoE
PlacementCeiling
CertificationCE, FCC, IC, EAC, ROHS
Product colorWhite
International Protection (IP) codeIP20
Security algorithmsWPA3-EAP, WPA3-PSK
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports2
Antenna typeInternal
Internal memory128 MB
Processor modelIPQ-6010
Operating system installedRouterOS
Number of products included1 pc(s)
Operating temperature (T-T)-40 - 70 °C
Weight and Dimensions IconWeight and Dimensions
Width228 mm
Height48 mm

Related product manuals