Do you have a question about the MikroTik CCR1009- 8G-1S-1S+ and is the answer not in the manual?
CPU core count | 9 |
---|---|
CPU nominal frequency | 1.2 GHz |
RAM | 2 GB |
Storage type | NAND |
Storage size | 128 MB |
Ethernet ports | 8 |
SFP ports | 1 |
SFP+ ports | 1 |
Operating System | RouterOS |
PoE in | Yes |
Voltage Monitor | Yes |
PCB temperature monitor | Yes |
Max Power consumption | 34W |
RouterOS license | 6 |
Supported input voltage | 18 - 57 V |
Connect via web browser to 192.168.88.1 using admin, set up WAN, passwords, and firewall.
Device supports dual power supplies (110-250V) and passive PoE input on Ether8 (12-56V).
Details the Ethernet, SFP, SFP+, microSD, microUSB, and RS232 ports available on the models.
Hold the RESET button during boot until LEDs flash to reset RouterOS configuration.
Handles backup boot loader, RouterOS reset, and Netinstall server search based on timing.
Use Reset2 jumper hole to reset RouterOS to defaults by holding a screwdriver during boot.
Currently tested with MikroTik RouterOS starting from version 6.9.
Equipment requires servicing by trained personnel due to electric shock hazard.
Information protected by copyright law; RouterBOARD, RouterOS, RouterBOOT are MikroTik trademarks.
RouterBOARD series equipment warranted for twelve (12) months against defects, excluding misuse.
Procedure for returning failed units, contacting reseller or MikroTik directly for warranty.
Router complies with essential requirements of Directive 1999/5/EC.
Provides links to full DoC and multilingual instruction manuals for device configuration.