MikroTik CCR2004-16G-2S+PC User Manual

CCR2004-16G-2S+PC
CCR2004-16G-2S+PC
Safety Warnings
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for
preventing accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making
sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify
the device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate
at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take
adequate measures
Electric shock hazard. This equipment is to be serviced by trained personnel only
Quick start
Connect with your computer to the device;
Download the configuration tool ;https://mt.lv/winbox
Open the tab and connect to the device using the MAC address,  Neighbors  192.168.88.1 is available on ether15 using a web browser;
Theuser name: , by default there is no password; admin
To dupdate the device to the latest software version ownload the latest RouterOS software from ;https://mikrotik.com/download
Choose ARM64 packages, and save them to your computer;
Return to the WinBox and upload downloaded packages;
Restart the device.
Powering
The device has dual integrated power supply units AC 100-240V with standard IEC compatible sockets.
Supported input voltage 36-57 V (DC jack) 36-57 (2-pin terminal)
Power adapter nominal voltage 48 V
Power adapter nominal current 0.9 A
Max power consumption (without attachments) 30 W
Max power consumption 36 W
Configuration

MikroTik CCR2004-16G-2S+PC Specifications

General

Brand	MikroTik
Model	CCR2004-16G-2S+PC
Category	Network Router
Language	English

Summary

Safety Warnings

General Safety Precautions

Follow standard practices for electrical safety, use approved accessories, and operate with care.

Electric Shock Hazard

This equipment requires servicing by trained personnel only due to electric shock risk.

Quick Start Guide

Initial Setup and Connection

Connect via MAC address using WinBox; default login is admin with no password.

Software Update Procedure

Download and upload RouterOS ARM64 packages via WinBox for updates.

Powering Information

Power Input Options

Supports AC 100-240V and DC 36-57V input, with specific power adapter details.

Configuration Details

Default Network Settings

Default IP is 192.168.88.1; initial setup requires WAN IP, user passwords, and updates.

Reset Button Functions

Two functions: reset configuration by holding until LED flashes, or Netinstall mode by holding longer.

Product Specifications

Hardware and Component Details

Lists product code, CPU, RAM, storage, ports, OS, switch chip, dimensions, and operating temperature.

Mounting Instructions

Rackmount and Desktop Placement

Device can be rackmounted or placed on desktop; instructions for attaching rack ears are provided.

Operating System Support

RouterOS Compatibility

Device supports RouterOS v7.2 or above; other OS versions have not been tested.

Regulatory Compliance

FCC and Canadian Interference Statements

Details FCC and Canadian compliance for Class B digital devices and interference mitigation measures.

Technical Specifications Summary

Multilingual Specification Overview

Provides a multilingual overview of power input, adapter output, IP class, and operating temperature.