LHG-5G-390 mm Dish (mesh size 0.5 t x1.0 wx1.4 mm ).
EU/US Switching Power Supply 24 V , 0.38 A, 9 W, Level VI, cable:1.5 m.
Hose Clamp SUS304 (Philips type; clamping diameter range 35-70 mm).
BRAC1_ LHG montage element.
DynaDish U-Bolt M8 (A2 Stainless Steel).
QuickMount AIM.
Specifications
For more information about LHG products, specifications and pictures please visit our web page: https://mikrotik.com/product/lhg_60g
Operating system support
The device supports RouterOS software version 6. The specific factory-installed version number is indicated in the RouterOS menu /system resource.
Other operating systems have not been tested.
MikroTik mobile app
Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point. Scan
QR code and choose your preferred OS.
This device meets the Maximum TX power limit per ETSI regulations. An Operational mode in the 60 GHz band:58.32 GHz, 60.48 GHz, 62.64 GHz, 64.80
GHz. This device is certified for outdoor use in Point-to-multipoint applications. In the following countries, fixed service is allowed only in part of the band:
AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
Federal Communication Commission interference statement
FCC ID: TV7LHGG60AD
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
To Next Page
Loading...
