•
14
•
5.Push the power button for a long time under the
recording mode will shut down the camera. Recording
file will be preserved automatically.
* Under standby mode without any operation the
camera will shut down automatically after 1 minute.
3.2 Infrared Mode
1. Boot up the camera, enter the standby mode.( The
blue indicator light is on.)
2. Press the power button for 2 seconds( The red
indicator light flashes twice.) Start IR infrared mode.
3. Press the power button again for 2 seconds to shut
down IR infrared mode.( The red indicator light flashes
twice.)
4. The infrared mode and recording mode/motion
detection mode can be open in the same time.
(1) You can open the infrared mode with recording
To Next Page
Loading...