•
18
•
for 3 times, blue and red light both flash for 3 times then
both off to start motion detection.
4. Once the camera detect the object is moving, the
camera starts recording.(The red and blue indicator light
both flashes once then both off.) If there is no object
moving the camera will stop recording.
5. Click any button to quit motion detection mode, back
to 1080P recording standby mode.
3.5 TV-OUT Mode
Connect to TV with the USB TV cable, boot up TV you
can be see images through the TV screen, you can take
pictures, video, open motion detection mode in the
mean time.
3.6 USB Cable
To Next Page
Loading...