•
15
•
mode. Click the power button to quit recording mode,
back to recording standby mode. Press the power button
again for 2 seconds to shut down IR infrared
mode.( The red indicator light flashes twice.)
(2) If you want to use infrared mode and motion
detection at the same time. You have to open the
infrared mode first then open the motion detection
mode.
3.3 Photographs-taking Mode
1. Boot up the camera, enter the standby mode.( The
blue indicator light is on.)
2. Click the M button twice to start taking
photographs.( The red indicator light is on.)
3. Every click on the power button is taking a pic.( The
red indicator light flashes with each clicking.)
To Next Page
Loading...