6.2 Accessing from the Web Browser
The camera can be used with the most standard operating systems and browsers. The
recommended browsers are Internet Explorer and Firefox.
6.2.1 Access over IE Browser
Launch the IE browser and enter the IP address of the camera.
Enter the User Name and Password and click “Login”.
Note: The default user name is “admin”, password is “ms1234”
At the first time to log on the device, the browser will prompt to install controls, please click
'Click here to download and install controls manually' as Figure 6-8.
Figure 6-8
Follow the prompts to install the controls, when it`s finished, it will pop out a window as
Figure 6-9. Please click 'Finish' and refresh the browser, then you will see the video.
Figure 6-9
Note: If IE9 or higher version browser is used, it is suggested that the Milesight camera web link
should be added as a trusted site. See the instructions as below:
Step 1: Start the IE9 or higher version browser, and select “Tools”select”Internet Options”.
To Next Page
Loading...
