Milesight Network Camera v3.2 - Mini Dome Camera Hardware; Hardware Installation; General Connection Methods

www.milesight.com 6
Milesight Technology Co., Ltd
4.4 Mini Dome Camera
Figure 4-4
5. Hardware Installation
5.1GeneralConnection
1. Connect the camera to the network and power using one of the methods listed below:
1) Basic connection (without PoE):
Step 1: connect the DC 12V end of the power adapter to the power port of the camera and
connect the other end to a wall outlet;
Step 2: connect the camera to a switch using an Ethernet cable.
Ethernet Port (PoE)
Micro SD/SDHC Card Slot