EasyManua.ls Logo

MILL SG2000MEC - Resetting the Heater; Maintenance; Warranty; Waste Disposal

MILL SG2000MEC
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 millnorway.com
EN
Resetting the heater
See  gure 7 on separate illustration sheet
Turn off the heater’s main switch. Press and hold
@ or % while you turn on the heater’s
main switch.
Maintenance
1. For cleaning, always unplug the heater and leave it to cool.
2. Wipe the heater regularly with a damp cloth and dry the surface before turning on the
heater again.
3. The heater must be cleaned at least once a month during the heating season.
CAUTION! The heater should never be immersed in water.
Avoid using detergents to clean the heater.
Never let any water get inside the heater; this can be hazardous.
 Dust etc. should be removed with a soft cloth.
5. The heater can be stored in a dry and clean place.
 If the heater stops working, do not attempt to repair it yourself because it can cause a

Warranty
The warranty is valid for 2 years. The heater will be repaired or replaced during this time
should any malfunction occur. The warranty applies if the heater is used according to
these instructions and the customer can present a purchase receipt. If the heater malfunc-
tions in any way, please contact the store where it was purchased or the importer.
Waste disposal
The symbol#indicates that this product is not to be disposed of together with house-
hold waste. This product must be delivered to a recycling service or container for electrical
appliances and electronic equipment. This is done to avoid health risks and prevent harm
to the environment. Local businesses (or the environmental station in your neighborhood)
are required by law to accept and recycle such products, as a means of environmentally
sound disposal.
Mill International AS
Grini Næringspark 10

Norway
www.millnorway.com

Related product manuals