EasyManua.ls Logo

MILL SG2000MEC - Page 5

MILL SG2000MEC
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
EN
The cord must be repaired by the manufacturer or by an
expert if it has been damaged, to avoid dangerous
situations.
Avoid using extension cords, which may overheat and

Never cover the air vents on the heater. Avoid poten-

blocked or covered. The heater should be used in rooms

The heater should not be installed in close proximity


The heater must never be used in rooms where gasoline,

garage.
Never touch an electric heater with wet hands. The heat-
er should be installed so a person showering or taking a
bath cannot come into direct contact with it.
Some parts of this product can become very hot and
cause burns. Particular attention has to be given where
children and vulnerable people are present.
The heater must be switched off, the plug removed and
the heater must cool down before it is moved.
Avoid overloading the mains (the circuit) where the heat-
er is connected. The heater may overload the electrical
circuit if other electrical devices are plugged into the
same socket outlet.
Do not use this heater in small rooms when they are
occupied by persons not capable to leaving the room on
their own, unless constant supervision is provided.
The product cannot be used by children under 8 years of
age and persons with reduced physical or mental abil-
ities or lack of experience and knowledge unless they
have been given supervision or instruction in the safe

Children should not play with the product. Cleaning and
maintenance should not be done by unsupervised
children.

Related product manuals