Why is my MILL TH350 not working?
If your MILL Humidifier isn't working, first, ensure it's properly plugged into a working socket. Next, verify that the unit is switched on. Also, check if the light indicating an empty water tank is illuminated; if so, refill the tank with cold water.
How to fix less steam than usual on MILL TH350 Humidifier?
If your MILL Humidifier is producing less steam than usual, the ultrasonic membrane might be dirty. Clean the ultrasonic membrane with the small brush that was included. The membrane is located in the middle of the ultrasonic device; it's shiny and round, surrounded by a lot of material.
Why does my MILL Humidifier steam smell bad?
If the steam from your MILL Humidifier has an undesirable odor, it could be due to a new machine or dirty water. If it's a new machine, unscrew the water tank's cap and let it air out in a cool place for 12 hours. If it's due to dirty water, clean the tank and refill it with clean, cold water.
What to do if my MILL TH350 Humidifier makes abnormal sound?
If your MILL Humidifier is making an abnormal sound, it could be due to resonance in the water tank when the water level is low. Try pouring more water into the water tank. Alternatively, the product might be unstable; move it to a firm and flat surface.
What to do if MILL Humidifier control panel is lit, but the product does not switch itself on?
If the control panel of your MILL Humidifier is lit but the product doesn't switch on, there might be too much water in the ultrasonic unit. Disconnect the product from the power source and empty the excess water from the ultrasonic unit.
Recommended daily procedure for filling the humidifier with fresh water for optimal indoor climate.
Instructions for cleaning the ultrasonic device and membrane with vinegar and water.
Guidance on cleaning, drying, and storing the product in its original packaging.
General| Brand | MILL |
|---|---|
| Model | TH350 |
| Category | Humidifier |
| Language | English |
To Next Page