Safety Instructions
Thankyouforyourcondenceinchoosingthismachine.Inordertoachieve
satisfactory results, read this manual carefully before using the machine for the
rsttime.
Alwaysstorethemanualtogetherwiththemachine.
IMPORTANT!
When using electrical tools, always observe carefully the following basic safety
rules.
Safe operation of the machine requires that you read the operating manual and
safety provisions and observe the instructions before using the machine for the
rsttime.Youshouldalsoobservegeneralsafetyrules.Youmaywishtohavea
professional demonstrate for you how to operate the machine before you use it.
UK - User manual
•
Wear safety goggles at all times
• Wearappropriateworkwearand
protective gloves
• Wearadustmask
• Weareardefenders
• Wearprotectivehaircoveringto
keep long hair out of the way.
• Useclamps/vicetoholdtheproduct
in place
• Securetheworkpiecetoavoid
rotation.
• Neverusethetoolinthepresence
of children
• Neverusethetoolifyouareunder
theinuenceofalchohol,medicineor
similar substances
• Alwaysworkstandingonarmoor
surface
• Donotexposethetooltohumidity
• Keeppowertoolsoutofthereachof
children
• Neveroverloadthetool
• Checkregularlythatallthescrews
are tight
• Neveruseyourhandstoholdthe
workpiece during the work
• Neverletthemachinerununsuper-
vised.
• Themachineproducespollutants!
Never allow it to run in enclosed or
poorly ventilated rooms. Make sure
there is an adequate exchange of air
if you are working in wells, ditches or
cramped surroundings. There is a
danger of carbon monoxide poisoning
or suffocation!
• Takebreaksduringtheworktoallow
the engine to cool down.
• Donotplacethehotmachineonto
drygrassorontoammableobjectt.
• Onlyinstallthecuttingtoolsdesigned
for the machine. Using other tools
and other accessories represents a
risk of injury to you.
• Donotleavetoolsconnected!Before
switching on, always check that all
tools have been removed.
• Onlyusegenuinespareparts,
accessories and special accessory
components. Using other spare
parts and accessories represents a
risk of accidents for the user.
The manufacturer cannot be held
liable for damage resulting from this.
• Iftheproductisdefective,contact
your local dealer or the Millarco
Service department, tel.:
+45 87434233 or E-mail:
service@millarco.dk