1. Press [MODE] repeatedly until the [CLICK] LED lights up.
2. Press [PAGE] repeatedly until the display shows the set time signature, e.g. ‘4-4’ .
3. Choose the time signature using [–] and [+] from a selection of 1/4 to 7/4, 3/8 and 6/8.
The setting is automatically stored.
Click tempo and time signature are automatically adjusted when playing patterns and can not
be changed.
1. Press [MODE] repeatedly until the [CLICK] LED lights up.
2. Press [PAGE] repeatedly until the display shows the set click interval, e.g. ‘--4’ .
3. Select the Beat interval using [–] and [+]. Possible values are: 1/4, 1/8, 1/12, 1/16, 1/24,
default value: 1/4.
The setting is automatically stored.
Setting the time signature
Setting Click interval
Operating
MPS-150
29
E-Drum Module
To Next Page
Loading...
