1. Press [MODE] repeatedly until the [CLICK] LED lights up.
2. Press [PAGE] repeatedly until the display shows the set sound, the so-called ‘click instru‐
ment’, in the ‘CLx’ format.
3. Use [–] and [+] to select the sound. Possible values are: CL1 – CL5, default value: CL1.
The setting is automatically stored.
1. Press [MODE] repeatedly until the [CLICK] LED lights up.
2. Press [PAGE] repeatedly until the display shows the set volume, e.g. ‘L24’ .
3. Use [–] and [+] to adjust the volume in a range between 0 and 32.
The setting is automatically stored.
Setting the Click sound
Setting the Click volume
Operating
30
MPS-150
E-Drum Module
To Next Page
Loading...
