The procedure for selecting either the Local or Global XLR Cabinet emulation is as follows:
1. Press the <Utility> button and scroll to page 2 of the Utility page using the <Page> knob. The display reads:
2. Using the <4> knob, you can turn the Cabinet Emulator to either Local On or Global On mode, or Global Off.
Output Mode
You can output the signal of your Millennium as either a Stereo or Mono signal.
1. Press the <Utility> button and scroll to page 1 of the Utility page using the <Page> knob. The display reads:
2. Using the <2> knob, you can turn set your Millennium to output either a Stereo or Mono signal.
J-3 Footswitch Set-Up
The J-3 footswitch offers three footswitches that can be assigned to perform numerous different functions. Out of the box, the J-3 will change
Presets Up and Down and will A-B channel switch. Changing these footswitch functions is done on Pages 13 and 14 of the Utility menu.
To access this assignment function, press the <Utility> button and turn the <Page> knob to page 14.
Page 14 of the utility menu gives you the following foot switch assignment options: Preset Up, Preset Down, Song List Up, Song List Down,
Channel A-B switching, Tuner Access, TapIt tap tempo switch and FX bypass. These selections can be made by using either the <2>, <3> or
<4> knobs.
Page 15 of the Utility menu lets you program a Song list so you can build a list of up to 32 different Presets to use that can be accessed by
pressing 1 footswitch. To set the Song list use the <3> knob to select the step and the <4> knob is used to select which preset will be used
with the selected step.
To Next Page
Loading...