Miller Weldmaster T-500 - Chapter 1: Machine Overview; Section 1.1: Intended Use

Page 1-1
Chapter 1: Machine Overview | Section 1.1: Intended Use
Chapter 1: Machine Overview
Section 1.1: Intended Use
The T-500 and T-100 are rotary hot air welders intended to heat
seal weldable thermal plastics such as:
-Vinyl (PVC) laminated fabrics
-Vinyl (PVC) coated fabrics
-Vinyl (PVC) films
-Polyurethane (PU) coated fabrics
-Polyurethane (PU) films
-Polypropylene (PP) coated fabrics
-Polyethylene (PE)
-Thermoplastic Rubber (TPR) film
-Thermoplastic Rubber (TPR) fabrics
-Non-woven Polyester
-Non-woven Polypropylene
-Various Fusing Tapes
-Weldable Webbing
-Rigid Extruded Products
• The manufacturer does not approve of any other uses for these
machines.
• The manufacturer does not approve of the removal of any safety
guards while in operation.
• The manufacturer does not approve of any unauthorized modifica-
tion of the machines.
• Only a properly trained technician may operate the T-500 and T-
100.
• Only a properly trained technician may perform any routine main-
tenance to the T-500 and T-100.