7
ASM programming, Continued
Example
• This table shows an example of “ASM UV Lamp Schedule” display.
Cycle Description
1 The ASM UV lamp is powered at 07:00 for 15 min.
2 The ASM UV lamp is powered at 08:30 for 5 min.
3 The ASM UV lamp is powered at 12:00 for 5 min.
4 The ASM UV lamp is powered at 14:00 for 5 min.
5 The ASM UV lamp is powered at 21:00 for 15 min.
• Another example is shown where only cycle N°1 is programmed: the
ASM UV lamp is powered at 7:00 for 45 min.
ASM UV
lifetime
It is possible to view the amount of time remaining before the water
system prompts you to replace the ASM lamp.
This can be viewed in 'Consumable Status' found in the READY Menu.
To Next Page