Need help?Do you have a question about the Milltronics VM15 and is the answer not in the manual?
General| Y-Axis Travel | 16 in |
|---|---|
| Z-Axis Travel | 20 in |
| Spindle Speed | 8, 000 rpm |
| Spindle Motor | 15 hp |
| Table Size | 36 in x 14 in |
| Control | Centurion 7 |
List of safety precautions and requirements before operating the machine.
Covers high voltage hazards, enclosure safety, and emergency stop button locations.
Safety measures related to attire, hair, and protective gear.
Detailed electrical safety rules, including arc flash hazards and qualified personnel.
Purpose of covers and enclosures to prevent entrapment and procedures for handling it.
Essential information on voltage, current, wire sizing, and grounding procedures.
Critical instructions and cautions for connecting transformers to the machine.
Guidance on the machine installation and checkout process for warranty activation.
Detailed procedure for leveling and tramming the machine using pads and a dial indicator.
Procedures for testing the emergency stop circuit and safety interlocks.
Procedure for clearing faults by cycling power and performing basic checks.
Diagram and labeling of the front panel controls and display for the 8200 CNC.
To Next Page
