Milltronics VM25 - User Manual

Electrical Manual
VM16,17,24,25,30
Electronic Orient Spindle
Rev 9
4-10-01

Milltronics VM25 Specifications

General

X-Axis Travel	40 in
Y-Axis Travel	20 in
Z-Axis Travel	20 in
Spindle Speed	8, 000 RPM
Spindle Motor	20 HP
Table Size	45 in x 19 in
Control	Centurion 7

Summary

Transformer Connection Alert

Electrical Safety Rules

Machine Schematic

MC5 Spindle Drive Parameters

MC5 Spindle Drive Parameters (15;10 HP)

Configuration settings for MC5 spindle drives (15/10 HP models).

MC5 Spindle Drive Parameters (22;15 HP)

Configuration settings for MC5 spindle drives (22/15 HP models).

MC5 Spindle Drive Parameters (30;22 HP)

Configuration settings for MC5 spindle drives (30/22 HP models).

Yaskawa Axis Drive Parameters

VM16 & 17 X;Y Drives (SGDB-10 ADG, Z SGDB 15 ADG)

Yaskawa drive parameter settings for VM16/17 X/Y and Z axes.

VM24 X;Y Drives (SGDB-10 ADG, Z 15 ADG)

Yaskawa drive parameter settings for VM24 X/Y and Z axes.

VM25 & 30 All Drives (SGDB-15 ADG)

Yaskawa drive parameter settings for VM25/30 all axes.

Card Cage Gain Setting Procedure

Drive Setting Procedure

Electrical Panel Layout

Parts List

Terminal Block, Relay, and Fuse Directories

Terminal Block Directory

Relay & Contactor Directory

Fuse Directory