Milnor 76028CBW - Safety Alert Messages-Unsafe Conditions; Damage and Malfunction Hazards; Hazards Resulting from Inoperative Safety Devices; Hazards Resulting from Damaged Mechanical Devices

Chapter 2. Safety
PELLERIN MILNOR CORPORATION
2.1.5. Safety Alert Messages—Unsafe Conditions [Document BIUUUS14]
2.1.5.1. Damage and Malfunction Hazards
2.1.5.1.1. Hazards Resulting from Inoperative Safety Devices
WARNING 6 : Multiple Hazards—Operating the machine with an inoperative safety device
can kill or injure personnel, damage or destroy the machine, damage property, and/or void the
warranty.
• Do not tamper with or disable any safety device or operate the machine with a
malfunctioning safety device. Request authorized service.
WARNING 7 : Electrocution and Electrical Burn Hazards—Electric box doors—
Operating the machine with any electric box door unlocked can expose high voltage conductors
inside the box.
• Do not unlock or open electric box doors.
WARNING 8 : Entangle and Crush Hazards—Guards, covers, and panels—Operating the
machine with any guard, cover, or panel removed exposes moving components.
• Do not remove guards, covers, or panels.
2.1.5.1.2. Hazards Resulting from Damaged Mechanical Devices
WARNING 9 : Multiple Hazards—Operating a damaged machine can kill or injure
personnel, further damage or destroy the machine, damage property, and/or void the warranty.
• Do not operate a damaged or malfunctioning machine. Request authorized service.
CAUTION 10 : Machine Damage Hazards—Drive shaft and drive motors—Although the
tunnel may operate with drive shafts disconnected between modules or units, or with a motor not
functioning, the added stress on drive components will quickly damage the machine.
• Do not operate the machine with any evidence of damage or malfunction.
2.1.5.2. Careless Use Hazards
2.1.5.2.1. Careless Operation Hazards—Vital Information for Operator Personnel (see also
operator hazards throughout manual)
WARNING 11 : Multiple Hazards—Careless operator actions can kill or injure personnel,
damage or destroy the machine, damage property, and/or void the warranty.
• Do not tamper with or disable any safety device or operate the machine with a
malfunctioning safety device. Request authorized service.
• Do not operate a damaged or malfunctioning machine. Request authorized service.
• Do not attempt unauthorized servicing, repairs, or modification.
• Do not use the machine in any manner contrary to the factory instructions.
• Use the machine only for its customary and intended purpose.
• Understand the consequences of operating manually.
CAUTION 12 : Goods Damage and Wasted Resources—Entering incorrect cake data
causes improper processing, routing, and accounting of batches.
16