Milnor 76028CBW - Sections

Table of Contents
PELLERIN MILNOR CORPORATION
Sections Figures, Tables, and Supplements
3.1.5. Maintenance Components—Machines and Controls Group
(Document BIUUUM10)
Figure 10: Belt and Pulley Conditions To
Look For. See Supplement 2.
Supplement 2: How to Examine Belts and
Pulleys
Supplement 3: How to Examine Chains
and Sprockets
Figure 11: Electric Box and Inverter.
These are examples. Your machine
can look different.
Figure 12: Chemical Inlet Manifolds for
Chemical Pump Systems. See caution
statement 32 . These are examples.
Your machine can look different.
Figure 13: Level Float Assembly. These
are examples. Your machine can look
different.
Figure 14: Water Pressure Regulator for
Chemical Flush. These are examples.
Your machine can look different.
Figure 15: Steam Inlet Strainer. These are
examples. Your machine can look
different.
Figure 16: Compressed Air Inlet Strainers.
These are examples. Your machine
can look different.
Supplement 4: How to Examine
Compressed Air Mechanisms
Figure 17: Compressed Air Mechanisms.
These are examples. Your machine
can look different.
Figure 18: Photoeyes. These are examples.
Your machine can look different.
Figure 19: Proximity Switches These are
examples. Your machine can look
different.
Supplement 5: How to Do a Test of
Emergency Stop Mechanisms
8