EasyManuals Logo

Milnor C Series Service Manual

Milnor C Series
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
<B8DD<C604(##(2E
7\_ccQbi_VDQW9\\ecdbQdY_^c±
=Cdi\UGQcXUb5hdbQSd_bc
Illustration Explanation Illustration Explanation
Stop! Read the manual first for complete
instructions before continuing.
Do not jack the machine here.
Do not lift the machine here.
Use three point or four point lifting as
determined by the lifting eyes furnished. Rig
the load using lifting cables of sufficient size
and length to ensure cables are not
over-stressed.
Do not lift the machine from one corner or one
side edge.
Do not start this machine until the packing
materials, lifting brackets, etc. with this tag
attached or behind this panel are removed.
These materials are painted red. Safety stands
or brackets (also painted red) may be provided
with this machine. Do not discard safety
stands or brackets
This motor or pump should rotate in the
direction of the arrow.
Do not start this machine until the part with
this tag is installed on the machine.
Do not remove this component from the
machine.

Other manuals for Milnor C Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Milnor C Series and is the answer not in the manual?

Milnor C Series Specifications

General IconGeneral
BrandMilnor
ModelC Series
CategoryWasher
LanguageEnglish

Related product manuals