Need help?Do you have a question about the Milnor 42026V6Z and is the answer not in the manual?
General| Model | 42026V6Z |
|---|---|
| Category | Washer |
| Brand | Milnor |
| Phase | 3 |
| Frequency | 60 Hz |
| Door Type | Hinged |
Explains the Milnor MilTouch washer-extractor control system and its touch-sensitive display.
Describes how to run wash formulas from the Home display, including selecting and starting them.
Details accessing and managing wash formulas, including changing, adding, or deleting them.
Overview of the Configuration display for setting machine parameters, units, and options.
Describes saving and transferring wash formulas and machine configurations via USB.
Explains the Run display interface, showing zones for names, timers, and machine status.
Provides information on MilTouch software updates, including version checks and benefits.
Step-by-step instructions for backing up wash formulas and machine configurations to a USB drive.
Procedure for installing new MilTouch software using a USB flash drive.
Explains how wash formulas are constructed from decisions and steps programmed into the controller.
Details the different types of steps available for programming wash formulas (e.g., Wash, Extract).
Details how to program chemical injection for wash steps, including chemical types and codes.
Explains the different options for drain action in wash steps.
Introduces RinSave commercial laundry formulas, providing specific examples.
Lists and explains common error messages displayed by the MilTouch and MilTouch-EX controllers.
Troubleshooting steps for the "Door Opened" error, including electrical failures.
Troubleshooting for "Too Long to Fill" errors, covering fill time, water pressure, and valves.
Steps to resolve "Too Long to Drain" errors, checking for blockages and valve malfunctions.
Guidance on diagnosing issues with temperature probes, including disconnections and malfunctions.
Information on machine inputs and outputs for diagnosis and communication with technicians.
Identification of components on the MilTouch controller circuit boards for troubleshooting.
Explains the MilTouch system for protecting the washer-extractor from imbalanced loads.
To Next Page
