Milnor 42044WR2 User Manual

PELLERIN MILNOR CORPORATION Post Office Box 400, Kenner, Louisiana 70063–0400, U.S.A.
Mechanical Parts and
Service
42044WR2, WR3
Manual Number: MCWD4M01
Edition (ECN): 2021112

Milnor 42044WR2 Specifications

General

Brand	Milnor
Model	42044WR2
Category	Washer
Language	English

Summary

General Service Information

Limited Standard Warranty

Warranty terms for Milnor machines, covering parts and labor.

How to Get the Necessary Repair Components

Safety Information and Hazards

Covers electrical, mechanical, cylinder, processing, and unsafe condition hazards.

Careless Use Hazards

Information on hazards from improper operation or servicing.

Torque Requirements for Fasteners

Fasteners Made of Carbon Steel

How to Apply a Threadlocker

Safety-Related Components & Assemblies

Vibration Safety Switch Adjustments

Procedures for adjusting the vibration safety switch.

Drive Assemblies

Drive Base Installation 4244WP2 SM (Single Motor)

Brake Assembly 4244WP2/WR2, 4244SP2/SR2

Drive Pulley and Belt Maintenance

Procedures for maintaining drive pulleys and belts.

Bearing Assemblies

Main Bearing and Seal Replacement for Divided Cylinder Machines

Steps for replacing main bearings and seals in divided cylinder machines.

Measuring Unmounted Clearance and Setting Bearing (Front or Rear)

Procedure to measure and set bearing clearance.

Tightening Bearing(s) (Front and/or Rear)

Instructions for tightening bearings after installation.

Frame, Pivots, and Suspension

Suspension Adjustments for Divided Cylinder Machines

Procedures for adjusting suspension on divided cylinder machines.

Control and Sensing Assemblies

Chemical Supply Devices

Supply Injector Assembly

Diagram and parts list for the supply injector.