Bearing Housing Components and Installation: 68036F5N, 68036H5N, 68036H5K, 68036M5K, 72046M5K
PELLERIN MILNOR CORPORATION
Figure 2: Detail view of the bearing housing front
Detailed view
Legend
A. Apply primer and adhesive to all bolts.
AD. Detailed view, Seal sleeve
B. Cylinder
D. Shell rear
G. Grease inlet for the front bearing
J. Grease outlet for the front bearing
K. 5 instances
L. not shown
M. 4 instances
N. 8 instances
Q. 12 instances
R. Torque to 375+/- 10 Ft. Lbs.
S. 20 instances
T. Torque to 8 +/- .5 Ft. Lbs. or 96 +/- 5 In. Lbs.
U. Apply silicone to the hub side of the gasket.
70
To Next Page
Loading...
Need help?
General
