GQcXUb5hdbQSd_b 9^cdQ\\QdY_^
@5<<5B9> =9<>?B 3?B@?B1D9?>
$
20DC8>= " ) <PRWX]T 3P\PVT 7PiPaSb
—Machine can be damaged if shipping restraints
are improperly utilized. These include various bolts, brackets, weldments and safety stands
(painted red), and the vibration safety switch (tie wrapped).
• DO NOT remove shipping restraints until installation is complete
• DO remove all shipping restraints before operating machine.
Prior to operation,
• Remove the red locking bolts from the front and back of the shell.
• Remove the red shipping bracket stands.
• Remove the tie wrap that secures the vibration safety switch.
• Check the perforated cylinder for smoothness before placing machine in service. Milnor
cannot accept cylinder finish damage claims after machine is in service.
— End of BIMUUI01 —
24
To Next Page
Loading...
