CUddY^W 4__b 9^dUb\_S[ CgYdSXUc
@5<<5B9> =9<>?B 3?B@?B1D9?>
1. Remove the cover plate. Manually push the door slider assembly (item 5) down until it stops.
Check for a minimum of one sixteenth of an inch clearence (1.6 mm), between the raised
portion of the door slider (item 6), and the lever of interlock switch SMD (item 3).
2. Manually push the door slider assembly up until it stops. Check that the rising slider
depresses interlock switch SME (item 1), “making” the switch.
— End of BIRH3M01 —
48
To Next Page
