Milnor MWR09E5 Series User Manual

Table of Contents
PELLERIN MILNOR CORPORATION
Table of Contents
Sections Figures, Tables, and Supplements
Preface
i. About This Manual (Document BICEUK01)
i.1. Scope
i.2. How to Identify this Manual and its Included Documents
(Document BIUUUD13)
i.3. Trademarks (Document BIUUUD14)
i.3.1. Trademarks of Pellerin Milnor Corporation Table 1: Trademarks
i.3.2. Trademarks of Other Companies Table 2: Trademarks
ii. Contacting Milnor
®
(Document BIUUUK06)
ii.1. Ordering Replacement Parts
ii.2. Customer Service and Technical Support
ii.3. Warranty Information
ii.4. Equipment Manuals
Table of Contents
Chapter 1. Commissioning
1.1. Important Owner/User Information (Document BICEUK02)
1.1.1. Ensure Safety of All Laundry Personnel
1.1.2. Customize the Machine Controller
1.2. About the Forces Transmitted by Washer-extractors
(Document BIWUUI02)
1.2.1. Foundation Considerations
1.2.2. How Strong and Rigid? Figure 1: How Rotating Forces Act on the
Foundation
1.3. Important Instructions for Pumped Chemical Inlets
(Document BIWUUI01)
1.3.1. How Pumped Chemical Systems can Internally Damage
the Washer-extractor
Supplement 1: Preventing Dribbling by
Purging Chemical Lines
1.3.2. Locating Chemical System Components to Reduce the
Risk of Internal Damage
Figure 2: Proper Routing of Chemical
Tubing
1.3.3. Preventing Leaks Which Can Injure Personnel and Cause
External Damage
Figure 3: Rear-mounted Water and Liquid
Supply Injector
1.4. Electrical Connections for Liquid Chemical Systems
(Document BICEUI01)
Supplement 2: Maximizing Chemical
Injection Precision
1.4.1. Pump Signal Connections Table 3: Chemical Injection Signals
Figure 4: Pump Signal Connections
1.4.2. Timer Stop Connections Figure 5: Timer Stop Connections

Milnor MWR09E5 Series Specifications

General

Brand	Milnor
Model	MWR09E5 Series
Category	Washer
Language	English