Milwaukee 2462-20 - User Manual

PERSONAL SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WORK AREA SAFETY
ELECTRICAL SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of fl ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
• If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
• Do not force the power tool. Use the correct
WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.
Failure to follow the warnings and instructions may result in electric shock, fi re and/or
serious injury. Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
POWER TOOL USE AND CARE
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting
the power tool accidentally.
• Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
• Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc., in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the infl uence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your fi nger on the switch or energising power tools
that have the switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
• Recharge only with the charger specifi ed by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fi re
when used with another battery pack.
• Use power tools only with specifi cally desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fi re.
• When battery pack is not in use, keep it away
from other metal objects like paper clips,
BATTERY TOOL USE AND CARE
M12™ CORDLESS HACKZALL
®
RECIPROCATING SAW
Cat. No.
2420-20
OPERATOR'S MANUAL
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.

Summary

General Power Tool Safety Warnings

Work Area Safety

General guidelines for maintaining a safe work environment, including lighting and keeping children away.

Electrical Safety

Precautions related to electrical hazards, such as using proper plugs and avoiding wet conditions.

Personal Safety

Guidelines for user safety, including staying alert, using protective equipment, and preventing unintentional starts.

Power Tool Use and Care

Instructions for proper operation, maintenance, and storage of power tools to ensure safety and longevity.

Battery Tool Use and Care

Safety and care instructions specific to battery-powered tools, including charging and handling.

Specific Safety Rules

Symbology

Explanation of symbols and abbreviations used in the manual for clarity and safety.

Specifications

Technical details and performance metrics of the tool, including voltage, RPM, and stroke length.

Functional Description

Identification and description of the tool's main components and their functions.

Assembly

Steps for preparing and assembling the tool, including battery insertion and blade clamp.

Selecting a Blade

Guidance on choosing the correct blade type and length for different applications.

Installing and Removing Blades

Detailed instructions for securely installing and removing blades from the Quik-Lok® Blade Clamp.

Operation

Procedures for operating the tool, including trigger lock, fuel gauge, and starting/stopping.

Starting, Stopping and Controlling Speed

How to initiate, cease, and adjust the tool's operational speed for optimal performance.

General Cutting

Basic techniques for making straight or contour cuts with the reciprocating saw.

Cutting Metals

Specific methods and considerations for cutting metal materials with the tool.

Plunge Cutting

Maintenance

Instructions for maintaining the tool, battery pack, and charger, including recommended service intervals.

Cleaning

How to clean the tool, battery pack, and charger using mild soap and a damp cloth.

Repairs

Information on where to return the tool, battery pack, or charger for necessary repairs.

Accessories

Information about compatible accessories and warnings regarding their use.

Milwaukee 2462-20 Specifications

General

Voltage	12V
Torque	1000 in-lbs
No Load Speed	0-2, 500 RPM
Battery Platform	M12
Battery Type	Lithium-Ion
Drive Size	1/4 inch hex