To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee 2953-20 and is the answer not in the manual?
Guidelines for maintaining a clean, well-lit, and safe work environment to prevent accidents.
Precautions to prevent electric shock, including proper tool usage and cord safety.
Recommendations for operator awareness, common sense, and wearing appropriate protective equipment.
Instructions for safe charging, handling, and storage of battery packs to prevent hazards.
Essential safety precautions specific to operating impact drivers, including accessory use.
Technical details including Cat. No., Volts, Battery Type, Charger Type, RPM, IPM, and operating temperature.
Explanation of common symbols used on the tool and in the manual, such as Voltage and UL Listing.
Identifies key components of the power tool, including chuck, LEDs, control switch, and trigger.
Instructions for inserting the battery, locking the trigger, and attaching/removing accessories.
Guidance on using the forward, reverse, and lock functions of the control switch and selecting speed modes.
Details on how to start, stop, and vary the tool's speed using the trigger and speed control.
Advice on applying impacting techniques for optimal torque and preventing fastener damage.
Instructions for proper tool maintenance, cleaning procedures, and when to seek professional repairs.
Information on recommended accessories and contact details for service in the US and Canada.
Details of the limited warranty coverage, exclusions, and terms for power tool products.
Guidelines for maintaining a clean, well-lit, and safe work environment to prevent accidents.
Precautions to prevent electric shock, including proper tool usage and cord safety.
Recommendations for operator awareness, common sense, and wearing appropriate protective equipment.
Instructions for safe charging, handling, and storage of battery packs to prevent hazards.
Essential safety precautions specific to operating impact drivers, including accessory use.
Technical details including Cat. No., Volts, Battery Type, Charger Type, RPM, IPM, and operating temperature.
Explanation of common symbols used on the tool and in the manual, such as Voltage and UL Listing.
Identifies key components of the power tool, including chuck, LEDs, control switch, and trigger.
Instructions for inserting the battery, locking the trigger, and attaching/removing accessories.
Guidance on using the forward, reverse, and lock functions of the control switch and selecting speed modes.
Details on how to start, stop, and vary the tool's speed using the trigger and speed control.
Advice on applying impacting techniques for optimal torque and preventing fastener damage.
Instructions for proper tool maintenance, cleaning procedures, and when to seek professional repairs.
Information on recommended accessories and contact details for service in the US and Canada.
Details of the limited warranty coverage, exclusions, and terms for power tool products.
General| Voltage | 18V |
|---|---|
| Max Torque | 2, 000 in-lbs |
| Anvil Type | 1/4" Hex |
| LED Light | Yes |
| Tool Warranty | 5 Years |
| Battery Type | M18 REDLITHIUM |
| Tool-Free Bit Changes | Yes |
