To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee 2612-20 and is the answer not in the manual?
Keep work area clean, well-lit, and free from flammable materials. Keep bystanders away.
Use proper plugs, avoid wet conditions, use extension cords for outdoor use, and use GFCI in damp locations.
Stay alert, use PPE, prevent unintentional starting, keep proper footing, and dress properly.
Use correct tool, do not force, maintain tools, keep cutting tools sharp, and keep handles dry.
Recharge with specified charger, use only designated battery packs, and keep away from metal objects.
Have tool serviced by qualified personnel; never service damaged battery packs.
Clean vents and handles with mild soap and damp cloth; avoid solvents.
Return tool, battery pack, or charger to the nearest service center for repairs.
Wear ear protectors to prevent hearing loss from tool noise.
Use auxiliary handle(s) for better control and to prevent personal injury.
Hold by insulated surfaces to avoid shock from hidden wiring.
Keep hands away from moving parts and use dust protection for lungs.
Maintain labels for important information; replace if unreadable or missing.
Slide battery pack into tool body until it latches securely.
Use switch for forward, reverse, or lock positions; stop tool before changing.
Pull trigger to start, vary speed by trigger pressure, release to stop.
Clamp workpiece, apply firm pressure in line with bit, ease through final part of hole.
Keep work area clean, well-lit, and free from flammable materials. Keep bystanders away.
Use proper plugs, avoid wet conditions, use extension cords for outdoor use, and use GFCI in damp locations.
Stay alert, use PPE, prevent unintentional starting, keep proper footing, and dress properly.
Use correct tool, do not force, maintain tools, keep cutting tools sharp, and keep handles dry.
Recharge with specified charger, use only designated battery packs, and keep away from metal objects.
Have tool serviced by qualified personnel; never service damaged battery packs.
Clean vents and handles with mild soap and damp cloth; avoid solvents.
Return tool, battery pack, or charger to the nearest service center for repairs.
Wear ear protectors to prevent hearing loss from tool noise.
Use auxiliary handle(s) for better control and to prevent personal injury.
Hold by insulated surfaces to avoid shock from hidden wiring.
Keep hands away from moving parts and use dust protection for lungs.
Maintain labels for important information; replace if unreadable or missing.
Slide battery pack into tool body until it latches securely.
Use switch for forward, reverse, or lock positions; stop tool before changing.
Pull trigger to start, vary speed by trigger pressure, release to stop.
Clamp workpiece, apply firm pressure in line with bit, ease through final part of hole.
General| Type | Rotary Hammer |
|---|---|
| Voltage | 18V |
| Battery Platform | M18 |
| Hammering Mode | Yes |
| No Load Speed | 0-1, 300 RPM |
| RPM | 0-1, 300 |
| Chuck Type | SDS-Plus |
| Tool Warranty | 5 Years |
| BPM | 0-4, 600 |
| Solid Bit Capacity | 5/8 inches |
| Concrete Drilling Capacity | 5/8 inches |
| Steel Drilling Capacity | 1/2 inches |
