EasyManua.ls Logo

Milwaukee 2715-20 User Manual

Milwaukee 2715-20
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
Cat. No.
No de cat.
2715-20
0757-20
M18™ AND M28™ FUEL™ 1-1/8" SDS PLUS ROTARY HAMMERS
M18™ AND M28™ FUEL™ 1-1/8" SDS PLUS ROTARY HAMMERS
PERCEUSES À PERCUSSION SDS PLUS DE 28 mm (1-1/8" ) FUEL™
M28™ ET M18™
ROTOMARTILLOS SDS PLUS FUEL™ M18™ Y M28™ DE 28 mm (1-1/8")
SDS
PLUS
Question and Answer IconNeed help?

Do you have a question about the Milwaukee 2715-20 and is the answer not in the manual?

Milwaukee 2715-20 Specifications

General IconGeneral
Voltage18V
Battery SystemM18
Motor TypeBrushless
Chuck TypeSDS-Plus
Weight (Tool Only)5.9 lbs
AVS (Anti-Vibration System)Yes
Electronic ClutchYes
Max Drilling Capacity (Concrete)1-1/8 inches
Max Drilling Capacity (Wood)1-1/2 inches
Max Drilling Capacity (Steel)1/2 inch
Solid Bit Capacity1-1/8 inches

Summary

OPERATOR'S MANUAL

Product Identification

Identifies the specific Milwaukee SDS Plus Rotary Hammers covered in this manual.

General Safety Warnings

Personal Safety

Stay alert, use PPE, prevent unintentional starting.

Electrical Safety

Match plugs to outlets. Avoid body contact with grounded surfaces.

Work Area Safety

Keep work area clean and well lit. Avoid explosive atmospheres.

Power Tool Operation and Care

Tool Use and Care

Do not force tool, use correct tool, ensure switch functions, disconnect power before adjustments.

Battery Tool Use and Care

Recharge with specified charger, use designated battery packs, keep away from metal objects.

Specific Safety Rules

Hearing Protection and Auxiliary Handle Use

Wear ear protection for noise, use auxiliary handle for control.

Assembly

Battery Pack Installation and Removal

Instructions for safely removing and inserting the battery pack.

Side Handle Adjustment

Procedure to loosen, rotate, and tighten the side handle for optimal grip.

Depth Gauge Setting

How to set the depth gauge rod for desired drilling depth.

Drill Bit and Chisel Installation

Instructions for inserting and securing SDS bits and chisels, and checking lock.

Operation

Mode Selection

Guides on selecting rotation only, rotary hammer, or hammer only modes.

Control Switch Operation

Details on forward, reverse, and lock positions for the control switch.

Starting, Stopping, and Speed Control

How to start, stop, and adjust the tool's speed using the trigger.

Operator Force and Anti-Vibration System

Guidance on applying optimal force for performance and comfort.

Applications

Drilling Techniques

Steps for starting holes, applying pressure, and preventing jams during drilling.

Drilling in Wood, Composition, and Plastic

Using correct bits, speeds, and techniques for various materials.

Accessories

Accessory Safety and Selection

Warning to remove battery before changing accessories and use recommended ones.

Maintenance

General Maintenance Precautions

Unplug charger, remove battery before maintenance. Contact service for repairs.

Tool Cleaning

Cleaning vents and handles with mild soap and damp cloth; avoid solvents.

Limited Warranty

USA and Canada Warranty

Details on warranty period, coverage, exclusions, and claims process.

Mexico, Central America, Caribbean Warranty

Information on warranty period, coverage, and procedure for claims.

Service and Support

United States Service Information

Contact numbers, website, and locations for service and support.

Canada Service Information

Contact numbers, website, and locations for service and support.

Mexico Service Information

Contact numbers, website, and locations for service and support.

Related product manuals