To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee 2713-20 and is the answer not in the manual?
General| Type | Rotary Hammer |
|---|---|
| Voltage | 18V |
| Power Source | Cordless |
| Motor Type | Brushless |
| Battery System | M18 |
| Chuck Type | SDS Plus |
| Battery Type | Lithium-Ion |
| Wood Drill Capacity | 1-1/2 inches |
| Steel Drill Capacity | 1/2 inch |
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Power tool plugs must match the outlet. Never modify the plug in any way.
Stay alert, watch what you are doing and use common sense when operating a power tool.
Instructions for safely removing and inserting the battery pack into the tool.
Steps to loosen, rotate, and tighten the side handle for desired positioning.
Procedure for setting the depth gauge rod for accurate drilling depth.
How to select between rotation only, rotary hammer, and hammer only modes.
Instructions for using the forward, reverse, and lock positions of the control switch.
How to start, stop, and vary the speed of the tool using the trigger.
Procedure for securely installing and removing SDS or SDS Plus bits and chisels.
Guide for using core bits for drilling large or long holes in concrete.
Steps for installing self-drilling anchors using tooth anchor chucks.
Guidelines for regular maintenance, inspection, and repair of the tool.
Instructions for cleaning the tool using mild soap and a damp cloth.
