To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee 2717-20 and is the answer not in the manual?
Ensures safe operation by maintaining a clean, well-lit, and hazard-free work environment.
Guidelines for preventing electric shock, including proper plug use and avoiding wet conditions.
Protective measures for the operator, emphasizing alertness, PPE, and preventing accidental starts.
Instructions for safely inserting and removing the battery pack from the tool.
Procedure for positioning and securing the auxiliary side handle for better control.
Steps for correctly installing and removing bits and chisels.
Specific instructions for using the SDS-Max system for bit installation and removal.
Guidance on choosing the correct operating mode: hammering with rotation, hammering-only, or chisel adjustment.
How to safely start and stop the power tool using the trigger.
Techniques for using the tool effectively, maintaining control, and handling binding situations.
Procedure for warming up the tool's lubrication in cold temperature conditions.
Instructions for drilling large or long holes using specialized core bits.
Techniques for drilling large diameter holes with core bits to manage dust and improve efficiency.
Detailed steps for installing anchors using the tool, emphasizing correct settings and safety.
Description of bushing tools used for surfacing concrete.
Use of seam tools for removing mortar for tuck pointing or caulking.
Application of bull points for demolition and starting holes in concrete.
Function of flat chisels for edging, chipping, or channeling.
Purpose of scaling chisels for removing weld spatter or scale.
Use of slotting chisels for creating slots in concrete and masonry.
Guidelines for keeping the tool, battery pack, and charger in good repair through regular maintenance.
Instructions for cleaning the tool, battery pack, and charger using approved methods.
Information on where to obtain service and repairs for the tool, battery pack, and charger.
Ensures safe operation by maintaining a clean, well-lit, and hazard-free work environment.
Guidelines for preventing electric shock, including proper plug use and avoiding wet conditions.
Protective measures for the operator, emphasizing alertness, PPE, and preventing accidental starts.
Instructions for safely inserting and removing the battery pack from the tool.
Procedure for positioning and securing the auxiliary side handle for better control.
Steps for correctly installing and removing bits and chisels.
Specific instructions for using the SDS-Max system for bit installation and removal.
Guidance on choosing the correct operating mode: hammering with rotation, hammering-only, or chisel adjustment.
How to safely start and stop the power tool using the trigger.
Techniques for using the tool effectively, maintaining control, and handling binding situations.
Procedure for warming up the tool's lubrication in cold temperature conditions.
Instructions for drilling large or long holes using specialized core bits.
Techniques for drilling large diameter holes with core bits to manage dust and improve efficiency.
Detailed steps for installing anchors using the tool, emphasizing correct settings and safety.
Description of bushing tools used for surfacing concrete.
Use of seam tools for removing mortar for tuck pointing or caulking.
Application of bull points for demolition and starting holes in concrete.
Function of flat chisels for edging, chipping, or channeling.
Purpose of scaling chisels for removing weld spatter or scale.
Use of slotting chisels for creating slots in concrete and masonry.
Guidelines for keeping the tool, battery pack, and charger in good repair through regular maintenance.
Instructions for cleaning the tool, battery pack, and charger using approved methods.
Information on where to obtain service and repairs for the tool, battery pack, and charger.
General| Type | Rotary Hammer |
|---|---|
| Voltage | 18V |
| Power Source | Cordless |
| Motor Type | Brushless |
| Battery System | M18 |
| Vibration Reduction | Yes |
| Chuck Type | SDS Plus |
| Battery Type | Lithium-Ion |
| Max. Drilling Capacity (Wood) | 1-1/2 in |
| Max. Drilling Capacity (Steel) | 1/2 in |
