Do you have a question about the Milwaukee 5546-21 and is the answer not in the manual?
Type | Rotary Hammer |
---|---|
Voltage | 120V |
Blows per Minute | 0-4, 600 BPM |
No Load RPM | 0-1, 100 RPM |
Chuck Type | SDS-Plus |
Blow Energy | 2.1 ft-lbs |
Cord Length | 8 ft |
No Load Speed | 0-1, 100 RPM |
Solid Bit Capacity | 5/8 inches |
Drilling Mode | Rotary Hammer, Hammer Only |
Drilling Capacity (Concrete) | 5/8 inches |
Drilling Capacity (Wood) | 1-1/2 inches |
Drilling Capacity (Steel) | 1/2 in |